I. Definitions

• "Customer": refers to the person or people whose body parts are used as the positive form to create a mold, and to the person or persons paying for and approving the piece(s).
• "BNG Life Casting" refers to BNG Life Casting, a sole proprietorship.
• "mold" describes a negative 3-dimensional image of the Customer made by placing in contact with the bod(y/ies) of the Customer materials which copy the form of his/her/their bod(y/ies).
• "cast" describes plaster, cement, or similar material which has been placed while fluid into a mold and allowed to harden to form a copy of the customer's body.
• "piece(s)" refers to the specific casts of the customer as described below:

II. Exchange of Value

BNG Life Casting agrees to provide the piece(s) to the customer.

The Customer agrees to pay the sum of $________ to BNG Life Casting.

The Customer grants to BNG Life Casting permission to use photographs and other 2-dimensional images made of the piece(s) for purposes of advertising and documentation. Such permission does not extend to reproduction of photographs or images for sale, or reassignment of these rights. All other rights relating to use and reproduction of the piece(s) are retained by the Customer(s). When such images are used, the Customer wishes (circle one)[ to remain anonymous / to have the following name(s) associated with the piece(s):

__________________________________________________________________________________

__________________________________________________________________________________

BNG Life Casting agrees to use the contact and shipping information provided below only for its own business purposes. This information will not be provided to any third party.

III. Nature of the Process

The Customer understands that the process of producing a cast is a manual operation, and that individual casts may vary slightly, and have minor imperfections.

The Customer understands that it is possible that creation of a mold can fail, and that a mold can be ruined in the production of casts. In the event that no cast acceptable to the Customer can be produced from a mold, the Customer may elect to either make another attempt at production of a mold, at no additional cost, or to receive a full refund, less the costs of materials consumed.

The Customer understands that the process of making molds involves covering the part(s) of the Customer's body as described by "piece(s)", above, with the materials required to make the mold.

The Customer understands that application of the mold materials will require physical contact by BNG staff with the areas of the Customer's body described by "piece(s)", above.

The Customer understands that making the mold may cause some minimal discomfort or irritation during or after the process of making or removing the mold.

IV. Signatures

Customer

Parent / Legal Guardian

BNG Life Casting

Contact / Shipping Information